Skip to content

Opus 5.5 Motion Design Prompts: Effort, Structure and Fixes That Work

By · · 9 min read

In short

Opus 5.5 does not output a finished video for motion design. It writes code that draws every frame of the animation. The result depends on three things: a prompt with scenes and seconds, the right effort level and clear style bans. Out of the box Opus 5.5 runs at "medium" effort, one level below Opus 5. For long video prompts, move up to "high" when scenes or timings go missing.

Opus 5.5 motion design prompts work differently from prompts for a video model. You describe an animation in words, and Claude writes the code that renders it frame by frame. The short answer to getting good results: a prompt with scenes and seconds, the right effort level and clear bans on generic styles. Opus 5.5 runs at "medium" effort out of the box, one level below its predecessor, which matters a lot for long video prompts. Everything in this guide comes from Anthropic's official pages, as of November 15, 2026.

Orbita: AI-generated product film for a social media scheduler, motion design video in 1:1
Example from the library: “Orbita”, made entirely from a prompt with Claude.

The video above is "Orbita", a product film for a social media scheduler, about 10 seconds long in a 1:1 format. It was made with Claude from a prompt of 13,097 words. If you want exactly this film for your own product, copy the prompt from its page and swap the name, colours and copy. That saves you the work described below. If you would rather write your own prompt, here are the rules.

What does Opus 5.5 bring to motion design?

Anthropic released Opus 5.5 on September 22, 2026 as the first model of the 5.5 family. According to the announcement, it performs at the level of Fable 5.1 on most work and costs 40% less to run than Opus 5. On the API you pay $4 per million input tokens and $20 per million output tokens.

Three points from Anthropic's prompting guide for Opus 5.5 matter for animation:

Anthropic does not name animation or motion design as a specific strength. The strengths it lists are long coding tasks, knowledge work and reading visual material. That still fits motion design well, because building a film from a prompt is a long coding task in the end. According to Claude's pricing page, Opus is included in Pro, Max, Team and Enterprise. The Free plan only has Sonnet and Haiku.

Which effort level fits a video prompt?

Opus 5.5 lets you choose how thoroughly it works. Anthropic calls this "effort" and offers five levels. The higher the level, the more the model thinks and the more of your usage limit it spends. On Opus 5.5, thinking cannot be switched off.

LowSmall edits: one word, one colour, one timing.
MediumFirst version of a film, as Anthropic recommends.Opus 5.5 default
HighLong prompts, when scenes go missing or timings are off.Next step up
XhighVery long tasks with many steps.Only if measurably better
MaxHighest capability, no regard for your limit.Only if measurably better
faster, saves your limitthinks more, uses more of your limit

As of November 15, 2026, based on Anthropic's effort guide. Matching the levels to video tasks is our recommendation, not a figure from Anthropic.

The default is the key detail. Opus 5 ran at "high" by default, Opus 5.5 runs at "medium". Anthropic says Opus 5.5 at "medium" still matches or beats Opus 5 at "high" on coding. Its advice is to start at "medium" and test for yourself instead of carrying over old settings. Keep "xhigh" and "max" for work where you have seen a real gain.

For a long video prompt, that means: build the first version at "medium". If the film comes back with missing scenes, wrong seconds or forgotten details, move one level up to "high". In Claude Code you set the level with the /effort command, for example /effort high, or with the arrow keys in the model picker under /model, as the Claude Code docs describe. On the API, the field is output_config.effort.

How to structure a motion design prompt for Opus 5.5

A good prompt tells the model what appears in the film, but also when it appears, how it moves and how it should look. The example below is short, yet it shows all four building blocks:

Build an 8-second product film in 9:16 for the running app Pulso. Scene 1 (0 to 3 s): the title "Keep going" builds word by word, each word rises 16 px and settles with a soft overshoot. Scene 2 (3 to 6 s): a phone slides in from the bottom and the number 5.2 km counts up. Scene 3 (6 to 8 s): logo and one line. Dark background, one green accent, no purple gradients, no sparkle particles. Export as an MP4 at 30 frames per second.

  • Format and goal
  • Scenes with seconds
  • Style and bans
  • Output

The scenes with seconds are the most important part. Without timings, the model spreads the action out on its own and the film feels like one slide after another. With timings and one movement per scene, it gets a rhythm. The prompts in our library go much further: for Orbita, 13,097 words define every movement, colour and transition. How to build a blueprint like that step by step is covered in how to write AI video prompts.

Why Opus 5.5 needs specific style bans

One section of Anthropic's guide applies directly to motion design. When Opus 5.5 gets a design task without clear direction, it falls back on a few default styles. A general line like "avoid a generic AI look" barely helps, Anthropic says, because it mostly swaps one default for another.

What works, according to Anthropic, is naming exactly which patterns to avoid. For a film, that could be "no purple gradients, no sparkle particles, no text flying in from the left". Anthropic also suggests looking at the first result, noting which default styles still show up, and extending your list of bans. That is the same loop you use for video anyway: look at the first version, then sharpen it.

When you sharpen, always say what should stay. Otherwise the model rebuilds parts that were already good:

In scene 2 (3 to 6 s) the phone slides in too fast. Change only this movement: 1.2 seconds instead of 0.5, easing out at the end. All other scenes, timings, colours and copy stay exactly as they are.

Common problems and how to fix them

Here are five problems you may run into when animating with Opus 5.5. The table shows what you see, what can cause it and what to change in the prompt or the settings:

What you seeUsual causeWhat helps
The film feels like one slide after anotherNo seconds and no movement per sceneGive every scene a time range and exactly one movement
It looks like every other AI videoNo style direction, so the model uses its defaultsSet the colours and name exactly what must not appear
Scenes are missing or timings are wrongA long prompt on the default "medium" levelMove up to "high" and rebuild the film
A small edit rebuilds everythingThe edit request does not say what should stayAdd "change only …, everything else stays exactly as it is"
The API reply stops in the middle of the codeThe output limit is too small for the replySet a large max_tokens, Anthropic names 128,000 as a value that works well

As of November 15, 2026. Causes and fixes are our recommendation, the details on effort levels and max_tokens come from Anthropic.

How does Opus 5.5 code become an MP4?

Opus 5.5 delivers code, not a video file. There are two ways to get an MP4. On the Team and Enterprise plans, Claude Motion builds the animation in the chat and exports it with one click. On Pro, Max and Ultra you use Claude Code: the whole film lives as code on your computer and gets rendered to an MP4. Which path fits you is explained in Claude Motion vs Claude Design. The export itself is covered in export a Claude animation to MP4.

And if you are wondering whether to use the stronger model for hard 3D scenes, Claude Fable 5.2 for video prompts explains when Fable is worth it next to Opus 5.5.

You do not have to write the long blueprint yourself. The DrillUp library has ready-made video prompts for motion design, 3D, talking head and launch films, each with the video it produced. Pick a video, copy the prompt and turn it into your own, with Opus 5.5, another Claude model or the AI of your choice. The DrillUp Academy walks you through getting from the preview to a finished MP4, step by step.

Frequently asked questions

Can Opus 5.5 make a video by itself?

Not directly. Opus 5.5 reads and writes text and code and can read images. For motion design it writes code that renders the animation frame by frame. You turn that into an MP4 with Claude Motion on the Team and Enterprise plans, or with Claude Code on your own computer.

What is the default effort level of Opus 5.5?

"medium". According to Anthropic, that is the default for Opus 5.5 and Haiku 5.5, while Opus 5 defaulted to "high". Anthropic says Opus 5.5 at "medium" matches or beats Opus 5 at "high" on coding. In Claude Code you change the level with the /effort command.

Is Opus 5.5 on the free plan?

No. Claude's pricing page lists Sonnet and Haiku for the Free plan, but not Opus. Opus is included in Pro, Max, Team and Enterprise (as of November 15, 2026).

Do my Opus 5 prompts still work with Opus 5.5?

Yes. Anthropic's prompting guide for Opus 5.5 says existing Opus 5 prompts should perform well without changes. The setting worth testing again is the effort level, because the default is one step lower.

More articles

9 min read

Claude Fable 5.2: what the new model means for video prompts

Anthropic released Claude Fable 5.2 on November 9, 2026. Here is what the model does, which plan includes it, what it costs and when it is really worth it for long video prompts.

9 min read

Claude Motion prompts: 12 examples with the finished video

12 Claude Motion prompts you can copy and adapt, for metrics, product walkthroughs, Reels and presentations. Each one comes with a finished video that shows where the prompt can lead.

9 min read

Claude Motion vs Claude Design vs Claude Code: which one makes your video?

Claude now has three routes that can end in a video: Claude Motion, Claude Design and Claude Code. Here is what each one makes, which plan includes it and which one actually gives you an MP4.